Comparison ledger
Accretech UF 200 S, Electroglas EG4, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | UF 200 SAccretech | EG4Electroglas |
|---|---|---|
| OEM | Accretech | Electroglas |
| Category | Test & Probe | Test & Probe |
| Wafer size | 200mm | 200mm |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Accretech UF 200 | Electroglas EG4 |
| Cited variants | — |
|
| Specifications | ||
| Air | Over 0.45 MPa[2] | — |
| Vacuum | Over -53K MPa[2] | — |
| Voltage | 208 VAC, Single Phase[2] | — |
| Frequency | 50/60Hz[2] | — |
| Wiring Configuration | 2Wire + Ground[2] | — |
| Full Load AMPS | 7.2A[2] | — |
| Main Breaker Rating | 10A[2] | — |
| Interrupt Current | 10KA A.I.C[2] | — |
| Diagram Number | FE06000[2] | — |
| Configuration | Yield Check Function[2] | — |
| Loader, Wafer Handling | Backside Holding[2] | — |
| Wafer Size | 5",6",8", Currently 8"(200mm) Configured[2] | — |
| X/Y axis | Probing Area(±120mm), Maximum Speed(200m/s)[2] | — |
| Power Consumption | Approximately 1.5kVA[2] | — |
| Air Supply Source Pressure | 0.45Mpa or more[2] | — |
| Manipulator | MHF300L[2] | — |
| Weight (Main Body) | 900kg (Standard)[2] | — |
| Make | Accretech / TSK[3] | — |
| Model | UF 200 S[3] | — |
| Wafer Sizes | 8 inch[3] | — |
| HOT Chuck | Present[2] | — |
| GPIB Interface | Present[2] | — |
| Yield Check Function | Present[2] | — |
| FAIL Check Function | Present[2] | — |
| Type | — | wafer prober[5] |
| Wafer size | — | 200mm[5] |
| Z-force | — | up to 150 kilograms[5] |
| Z-drive | — | probe-centered Z-drive[5] |
| Z-drive type | — | Probe centered Z-drive[5] |
Plan your fab
Building a Test & Probe process? Get a complete equipment list.
Open the fab equipment planner →