Comparison ledger
Applied Materials 0010-21246 Part, MPM MPM 125, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0010-21246 PartApplied Materials | MPM 125MPM |
|---|---|---|
| OEM | Applied Materials | MPM |
| Category | — | — |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | — | MPM MPM 125 |
| Cited variants | — |
|
| Specifications | ||
| Maximum Board Size | — | 609.6 mm x 508 mm (24" x 20")[2] |
| Minimum Board Size | — | 50.8 mm x 50.8 mm (2" x 2")[2] |
| Board Thickness | — | 0.2 mm (0.008") to 5.0 mm (0.20"), up to 6.0 mm (0.24") without top clamp[2] |
| Maximum Board Weight | — | 4.5 kg (9.92 lbs)[2] |
| Underside Clearance | — | 12.7 mm (0.5") standard, configurable for 25.4 mm (1.0")[2] |
| Maximum Print Area | — | 609.6 mm x 508 mm (24" x 20")[2] |
| Print Gap | — | 0 mm to 6.35 mm (0" to 0.25")[2] |
| Print Speed | — | Up to 305 mm/sec (12.0"/sec)[2] |
| Print Force | — | 0 to 20 kg (0 lb to 44 lbs)[2] |
| Stencil Frame Size | — | 737 mm x 737 mm (29" x 29")[2] |
| Vision Field-of-View | — | 10.6 mm x 8.0 mm (0.417" x 0.315")[2] |
| Camera System | — | Single digital camera - patented look up/down vision[2] |
| Total System Alignment Accuracy | — | ±12.5 microns at 6 sigma, Cpk >= 2.0[2] |
| Cycle Time | — | 13 seconds[2] |
| Power Requirements | — | 200 to 240 VAC single phase @50/60 Hz, 15 A[2] |
| Air Supply Requirements | — | 100 psi at 4 cfm (standard) to 18 cfm (vacuum wipe) (7 bar @ 5 L/s to 12 L/s), 12.7 mm diameter line[2] |
| Machine Height | — | 1,940 mm (37.0")[2] |
| Machine Depth | — | 1,593.1 mm[2] |
| Machine Width | — | 1,202.7 mm[2] |
| Machine Weight | — | 816.5 kg[2] |
| Crated Weight | — | 1110 kg[2] |
| Control Software | — | Benchmark software on Windows XP SP3[1] |