Comparison ledger
Applied Materials 0020 54137 Part, Juki JX-100 LED, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0020 54137 PartApplied Materials | JX-100 LEDJuki |
|---|---|---|
| OEM | Applied Materials | Juki |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Applied Materials 0020 54137 Part | Juki JX-100 LED |
| Specifications | ||
| Configuration | Conn Ector Copper Threaded W / Solder Ptg[1] | — |
| Board size | — | Min.50×50 ~ Max.360x800MM[2] |
| Component Size | — | Min. 0603mm(0201 Inch) ~ Max. □33.5mm[2] |
| Placement speed | — | 15,300CPH[2] |
| Board size range | — | Min 50 mm × 50 mm to Max 800 mm × 360 mm (when sent through twice; when sent through once, maximum length is 410 mm × 360 mm)[3] |
| Component size range | — | Min 0603 mm (0201 inch) to Max □33.5 mm[3] |
| Component height | — | 12.0 mm (becomes 9.0 mm when board’s X-directional length exceeds 630 mm)[3] |
| Placement speed (chip, optimized) | — | 19,300 CPH[3] |
| Placement speed (IPC9850) | — | 15,300 CPH[3] |
| Placement accuracy | — | ±0.05 mm (±3σ)[3] |
| Component centering device | — | Laser centering (LNC60)[3] |
| Feeder inputs | — | Max 30 8mm tape feeders (60 with optional rear bank)[3] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →