Comparison ledger
Applied Materials 0242-36515 RTP XE Chamber Temperature Match Kit, Lindberg Tube, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 0242-36515 RTP XE Chamber Temperature Match KitApplied Materials | TubeLindberg |
|---|---|---|
| OEM | Applied Materials | Lindberg |
| Category | Thermal / Diffusion | Thermal / Diffusion |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | — | Lindberg Tube |
| Cited variants | — |
|
| Specifications | ||
| Maximum Temperature (Mini-Mite series) | — | 1100°C[1] |
| Maximum Temperature (STF55433 model) | — | 1500°C[3] |
| Chamber Diameter (Mini-Mite series) | — | 1 in (2.5 cm)[1] |
| Chamber Length (Mini-Mite series) | — | 12 in (30.5 cm)[1] |
| Controller Type (Mini-Mite series) | — | Digital UT150 (single setpoint) or UP150 (programmable)[1] |
| Thermocouple Type (Mini-Mite series) | — | Type K[1] |
| Insulation (Mini-Mite series) | — | Moldatherm low thermal mass ceramic fiber[1] |
| Power Options (Mini-Mite series) | — | 120 VAC or 208/240 VAC, 50/60 Hz, single phase; 800 W[1] |
| Weight (Mini-Mite series) | — | 28 lb (12.7 kg)[1] |
| Number of Zones (HTF and STF series) | — | Three-zone control[2] |
| Controller Type (HTF and STF series) | — | Digital temperature controllers[2] |
| Process Tube (HTF and STF series) | — | Customer-supplied process tube required[2] |
| Controller (STF55433 model) | — | Digital temperature controller (manual reference)[3] |
| Maximum Operating Temperature (Mini-Mite) | — | 1100°C[1] |
| Chamber Dimensions (Mini-Mite) | — | 1 in. diameter x 12 in. length (2.5 x 30.5 cm)[1] |
| Control Type (Mini-Mite) | — | Single Setpoint Digital or Programmable Digital[1] |
| Voltage Options (Mini-Mite) | — | 120VAC or 208/240VAC, 50/60Hz, single phase[1] |
| Net Product Weight (Mini-Mite) | — | 28 lbs (12.7 kg)[1] |
| Thermocouple Type (Mini-Mite) | — | Type K[1] |
| Control Zones (HTF/STF Series) | — | Three-zone[2] |
| Maximum Operating Temperature (STF55433) | — | 1500°C[3] |
| Equipment type | — | Tube furnace[4] |
| Make | — | Lindberg[4] |
| Model | — | not stated[4] |
| Control mode family | — | single-setpoint and programmable digital control[1] |
| Process tube requirement | — | customer-supplied process tube required for operation[2] |
| Three-zone control | — | three-zone control systems[2] |
Plan your fab
Building a Thermal / Diffusion process? Get a complete equipment list.
Open the fab equipment planner →