Comparison ledger
CyberOptics SE500-II, KLA .496 PSL Wafer, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | SE500-IICyberOptics | |
|---|---|---|
| OEM | CyberOptics | KLA |
| Category | Metrology & Inspection | Metrology & Inspection |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | CyberOptics SE500-II | KLA .496 PSL Wafer |
| Specifications | ||
| Board Size (Max.) | 510 x 510 mm[1] | — |
| Board Size (Min.) | 50 x 50 mm[1] | — |
| Inspection Speed @ 30µm | 80cm²/sec[1] | — |
| Inspection Speed @ 15µm | 50cm²/sec[1] | — |
| Gage R&R | <10%, 6σ[1] | — |
| Sensor | Exclusively designed and built by CyberOptics[1] | — |
| Scan sequence | Unique 'all-in-one' scan sequence[1] | — |
| Software | SPI V5 software[1] | — |
| Board Edge Clearance (Top) | 2.5 mm (0.10 in.)[2] | — |
| Board Edge Clearance (Bottom) | 3.0 mm (0.12 in.)[2] | — |
| Component Clearance (Top above belt) | 20.1 mm (0.78 in.)[2] | — |
| Component Clearance (Bottom) | 25.4 mm (1.0 in.)[2] | — |
| Conveyor Speed | 150 - 450 mm/sec (5.9-17.7 in./sec)[2] | — |
| Dimensions | 39.5" x 50" x 55" H[2] | — |
| Weight | 1,433 lbs[2] | — |
| Inspection type | 3D solder paste inspection[2] | — |
| Max board size | 510 x 510 mm[1] | — |
| Min board size | 50 x 50 mm[1] | — |
| Conveyor speed | 150 - 450 mm/sec[2] | — |
| Conveyor width adjust | Automatic SMEMA[2] | — |
| Board edge clearance top | 2.5 mm[2] | — |
| Board edge clearance bottom | 3.0 mm[2] | — |
| Component clearance top (above belt) | 20.1 mm[2] | — |
| Component clearance bottom | 25.4 mm[2] | — |
| Condition wording | Complete & Operational[3] | — |
| Configuration | — | NIST Traceable[4] |
| Wafer size | — | 8 inch[4] |
| Traceability | — | NIST Traceable[4] |
| Compatible systems | — | Capable on Surfscan 6xy0 and SP1[4] |
| Category | — | Metrology & Inspection[5] |
Plan your fab
Building a Metrology & Inspection process? Get a complete equipment list.
Open the fab equipment planner →