Comparison ledger
Dek 03 iX Automatic, Juki GKG GT++, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | GKG GT++Juki | |
|---|---|---|
| OEM | Dek | Juki |
| Category | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Dek 03 iX Automatic | — |
| Specifications | ||
| Vintage | 2020[1] | — |
| Max PCB size | — | 510x510 mm[2] |
| Min PCB size | — | 50x50 mm[2] |
| PCB thickness | — | 0.4-6 mm[2] |
| Max board weight | — | 5 kg[2] |
| Transport height | — | 900±40 mm[2] |
| Print speed | — | 10-200 mm/sec[2] |
| Print pressure | — | 0.5-10 kg[2] |
| Stencil frame size | — | 470x370 mm ~ 737x737 mm[2] |
| Repeat position accuracy | — | ±12.5um@6, CPK≥2.0[2] |
| Print accuracy | — | ±18um@6, CPK≥2.0[2] |
| Print cycle time | — | < 7.5 sec[2] |
| Power supply | — | AC:220±10%, 50/60Hz, 3.0KW[2] |
| Air pressure | — | 4~6 kgf/cm²[2] |
| Machine dimensions (L x W x H) | — | 1240 x 1410 x 1500 mm[2] |
| Machine weight | — | approx 1100 kg[2] |
| Cleaning method | — | Dry, wet, vacuum three modes[2] |
| Camera type | — | CCD digital camera[2] |
| Repeat position accuracy (alternative) | — | ±10um@6σ, CPK>2.0[3] |
| Printing precision (alternative) | — | ±17um@6σ, CPK>2.0[3] |
| Print cycle time (alternative) | — | <7.5 sec (excluding cleaning and printing)[3] |
| PCB thickness (alternative) | — | 0.4~15 mm[4] |
| Repeat position accuracy (Flason) | — | ±0.01mm (test data and method available)[4] |
| Printing accuracy (Flason) | — | ±0.025mm (test data and method available)[4] |
| Print cycle time (Flason) | — | <8 sec (exclude printing & cleaning)[4] |
| Power supply (Flason) | — | AC:220±10%, 50/60Hz, 1.5KW[4] |
| Air consumption (Flason) | — | approx 0.07 m³/min[4] |
| Squeegee speed | — | 6-300 mm/sec[4] |
| Squeegee pressure | — | 0-10 kg software control (closed-loop pressure feedback)[4] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →