Comparison ledger
EV Group 101, RECIF SPP 300 Wafer, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 101EV Group | SPP 300 WaferRECIF |
|---|---|---|
| OEM | EV Group | RECIF |
| Category | Lithography | Lithography |
| Wafer size | — | Front & Backside Wafer ID Reader (RFID) |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | EV Group 101 | RECIF SPP 300 Wafer |
| Specifications | ||
| OEM | EV Group[1] | — |
| Model | 101[1] | — |
| Equipment name | EVG 101 Spray Coater[1] | — |
| NEMO ID | evgspraycoat[1] | — |
| Training required | EVG 101 Training[1] | — |
| Training duration | 1.50 hours[1] | — |
| Processing technique | Resist Spray Coat (manual)[1] | — |
| Cleanliness | "All"[1] | — |
| Location | SNF Paul G Allen L107 Cleanroom[1] | — |
| Wafer diameter (substrate size) | up to 300 mm[2] | — |
| Available modules | Spin coat / OmniSpray® / develop[2] | — |
| Wafer handling options | Bowed / warped / thin wafer handling, edge handling[2] | — |
| Dispense options | Various resist dispense pumps covering viscosities up to 52000 cP; constant pressure dispense systems; EBR / BSR / pre-wet / bowl wash / liquid priming[2] | — |
| Processing technique (at SNF) | Resist Spray Coat (manual)[3] | — |
| Cleanliness group (at SNF) | "All"[1] | — |
| Configuration | — | 300 mm (12") FOUP Load Port[4] |
| Servicing Port | — | M / F Rear (Can Add 3rd LP Here)[4] |
| Wafer size | — | Front & Backside Wafer ID Reader (RFID)[4] |
| Status Lamp (Front & Rear) | — | Programmable[4] |
| Turn to Release EMO | — | Load Ports, M / F Rear[4] |
| Vacuum (House) | — | Optional Depending on LPS Used[4] |
| Power | — | 110 VAC, 15 A, 3 Wire, 1 Phase, Freq 60 Hz[4] |
Plan your fab
Building a Lithography process? Get a complete equipment list.
Open the fab equipment planner →