Comparison ledger
Kulicke & Soffa IConn MEM Plus, West Bond 10100, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | IConn MEM PlusKulicke & Soffa | 10100West Bond |
|---|---|---|
| OEM | Kulicke & Soffa | West Bond |
| Category | Packaging & Bonding | Packaging & Bonding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Kulicke & Soffa IConn MEM Plus | West Bond 10100 |
| Specifications | ||
| Ultra Fine Pitch | 35 μm[1] | — |
| Gold wire diameter | 0.6 mil to 2.0 mil[1] | — |
| Silver alloy wire diameter | 0.6 mil to 2.0 mil[1] | — |
| Bonding Area (X) | 56 mm[1] | — |
| Bonding Area (Y) | 80 mm[1] | — |
| Total Bond Placement Accuracy | 2.0 μm @ 3 sigma[1] | — |
| Maximum Wire Length (1.0 mil wire) | 7.6 mm[1] | — |
| Maximum Wire Length (0.6 mil wire) | 3.0 mm[1] | — |
| Minimum Loop Height (0.6 mil wire) | 40 μm[1] | — |
| Input Voltage | 200-240 VAC, single phase, 50/60 Hz[1] | — |
| Power Consumption (nominal) | 1.5 KVA[1] | — |
| Power Consumption (max) | 2.6 KVA[1] | — |
| Footprint | 889 mm x 1009 mm (35" x 39.7")[1] | — |
| Weight (machine only) | 620 kg (1367 lbs)[1] | — |
| Minimum Air Pressure | 3.52 kg/sq cm (50 psi)[1] | — |
| Nominal Air Consumption | 185 liters/min @ 4.6 kg/sq cm (6.5 CFM @ 65 psi)[1] | — |
| Cover Gas Consumption (nominal) | 0.9 liters/min[1] | — |
| Setup Time (same leadframe type) | < 4 min[1] | — |
| Setup Time (different leadframe type) | < 8 min[1] | — |
Plan your fab
Building a Packaging & Bonding process? Get a complete equipment list.
Open the fab equipment planner →