Comparison ledger
Palomar 9000 Wedge, West Bond 10100, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 9000 WedgePalomar | 10100West Bond |
|---|---|---|
| OEM | Palomar | West Bond |
| Category | Packaging & Bonding | Packaging & Bonding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Palomar 9000 Wedge | West Bond 10100 |
| Specifications | ||
| Voltage | 230 VAC[1] | — |
| SCCR | 10 kA[1] | — |
| Power | 230 VAC, 50/60 Hz, 15 A, single phase[1] | — |
| CE Marked | Yes[1] | — |
| Vacuum | -25 inHg (85 kPa)[2] | — |
| Air at Bonder Inlet | CDA or N2: 60 psig @ 15 CFM[2] | — |
| Dimensions (Height) | 1,778 mm (70")[2] | — |
| Dimensions (Footprint) | 800 x 953 mm (31.5" x 37.5")[2] | — |
| Weight | 3,100 lbs. (1,400 kg)[2] | — |
| Flooring Requirement | 102 mm (4") thick concrete continuous slab[2] | — |
| Cycle Time | 0.125 sec/wire[2] | — |
| Bond Type | Thermosonic, ultrasonic wire and ribbon bonding[2] | — |
| Wire Pitch | 50 μm (0.0019") using 20 μm (0.00078") wire[2] | — |
| Repeatability | +/- 1 μm, 3σ[2] | — |
| Bond Area | 304.8 x 152.4 mm (12" x 6")[2] | — |
| Wire Size | Wire (Au & Al): 17.5 to 75 μm (0.7 to 3 mil)[2] | — |
| Ribbon Size | Ribbon (Au): 12.7 to 50.8 μm up to 25.4 μm (0.5 x 2 mil up to 1 x 10 mil)[2] | — |
| Speed | Up to 7 wires per second and up to 10 loops per second[2] | — |
| X/Y Axis Resolution | 0.10 μm[2] | — |
| Vision System | Cognex® Series 8500[2] | — |
| Control System | Linear motor/encoder (X/Y), voice coil/encoder (Z linear / Z rotary), Servo EFO/encoder PR[2] | — |
| Theta Range | +/- 7° from taught angle[2] | — |
| VisionPilot Range | +/- 180° from taught angle[2] | — |
| Focus Range | Programmable focus across 15.24 mm (0.600") - focal lens floats on Z course axis[2] | — |
| Z Axis Stroke | 20 mm (0.80")[2] | — |
| Capture Range | 760-1300 μm (30-50 mils), magnification dependent[2] | — |
| Heated Stage Options | 6" x 4", 6" x 6", 6" x 10", 6" x 12", 8" x 8", 8" x 12"[2] | — |
Plan your fab
Building a Packaging & Bonding process? Get a complete equipment list.
Open the fab equipment planner →