Comparison ledger
Branson 101-149-053 Gold Booster, Palomar 9000 Wedge, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 101-149-053 Gold BoosterBranson | 9000 WedgePalomar |
|---|---|---|
| OEM | Branson | Palomar |
| Category | Packaging & Bonding | Packaging & Bonding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Branson 101-149-053 Gold Booster | Palomar 9000 Wedge |
| Specifications | ||
| Configuration | 1:1.5[1] | — |
| Manufacturer | Branson[2] | — |
| Model | 101-149-053[2] | — |
| Type | Gold Booster[2] | — |
| Operating frequency | 20 kHz[3] | — |
| Gain | 1:1.5[2] | — |
| Mounting thread | 1/2-20[3] | — |
| Length | 5.4 in[3] | — |
| Gain ratio | 1:1.5[2] | — |
| Voltage | — | 230 VAC[4] |
| SCCR | — | 10 kA[4] |
| Power | — | 230 VAC, 50/60 Hz, 15 A, single phase[4] |
| CE Marked | — | Yes[4] |
| Vacuum | — | -25 inHg (85 kPa)[5] |
| Air at Bonder Inlet | — | CDA or N2: 60 psig @ 15 CFM[5] |
| Dimensions (Height) | — | 1,778 mm (70")[5] |
| Dimensions (Footprint) | — | 800 x 953 mm (31.5" x 37.5")[5] |
| Weight | — | 3,100 lbs. (1,400 kg)[5] |
| Flooring Requirement | — | 102 mm (4") thick concrete continuous slab[5] |
| Cycle Time | — | 0.125 sec/wire[5] |
| Bond Type | — | Thermosonic, ultrasonic wire and ribbon bonding[5] |
| Wire Pitch | — | 50 μm (0.0019") using 20 μm (0.00078") wire[5] |
| Repeatability | — | +/- 1 μm, 3σ[5] |
| Bond Area | — | 304.8 x 152.4 mm (12" x 6")[5] |
| Wire Size | — | Wire (Au & Al): 17.5 to 75 μm (0.7 to 3 mil)[5] |
| Ribbon Size | — | Ribbon (Au): 12.7 to 50.8 μm up to 25.4 μm (0.5 x 2 mil up to 1 x 10 mil)[5] |
| Speed | — | Up to 7 wires per second and up to 10 loops per second[5] |
| X/Y Axis Resolution | — | 0.10 μm[5] |
| Vision System | — | Cognex® Series 8500[5] |
| Control System | — | Linear motor/encoder (X/Y), voice coil/encoder (Z linear / Z rotary), Servo EFO/encoder PR[5] |
| Theta Range | — | +/- 7° from taught angle[5] |
| VisionPilot Range | — | +/- 180° from taught angle[5] |
| Focus Range | — | Programmable focus across 15.24 mm (0.600") - focal lens floats on Z course axis[5] |
| Z Axis Stroke | — | 20 mm (0.80")[5] |
| Capture Range | — | 760-1300 μm (30-50 mils), magnification dependent[5] |
| Heated Stage Options | — | 6" x 4", 6" x 6", 6" x 10", 6" x 12", 8" x 8", 8" x 12"[5] |
Plan your fab
Building a Packaging & Bonding process? Get a complete equipment list.
Open the fab equipment planner →