Comparison ledger
Melles Griot 05 LHP 151, Newport 1830 C Optical Power Meter, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 05 LHP 151Melles Griot | 1830 C Optical Power MeterNewport |
|---|---|---|
| OEM | Melles Griot | Newport |
| Category | Precision Optics | Precision Optics |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Melles Griot 05 | Newport 1830 C Optical Power Meter |
| Specifications | ||
| Configuration | With 05 LPL 340 Power Supply (Does not power on)[1] | — |
| Equipment type | Laser[1] | — |
| Make | Melles Griot[1] | — |
| Model | 05 LHP 151[1] | — |
| Power state | Does not power on[1] | — |
| Display Type | — | 4.5 digit, annunciated, backlit, wide-angle view LCD[3] |
| Display Update Rate | — | 75 ms[3] |
| Auto-Ranging Time | — | 200 ms (typical)[3] |
| DC Accuracy | — | < ±0.2% (typical)[3] |
| Analog Output | — | 0 to 2 V into 1 MΩ[3] |
| Signal Ranges | — | Up to 8 decades (dependent on detector type)[3] |
| GPIB Bus Transfer Time | — | 10 ms (typical)[3] |
| Connector - Calibration Module | — | 8 pin Sub-mini DIN[3] |
| Connector - Analog Output | — | BNC[3] |
| Connector - RS-232C | — | 9 pin D-Sub[3] |
| Connector - GPIB | — | 24 Conductor D[3] |
| Power Requirements | — | 100-120/220-240 V AC, 50/60 Hz[3] |
| Dimensions | — | 3.7 x 7.5 x 9.0 in (94 x 191 x 229 mm)[4] |
| Weight | — | 5 lb (2.3 kg)[4] |
| High End Wavelength Limit | — | 1650 nm[5] |
| Measurement Units | — | dB, dBm, Watt[5] |
| Power Sensitivity | — | 10 pW[5] |
| Full Scale Power (with OD-3 attenuator) | — | 2 W[5] |
| Wavelength Adjustment Step | — | 1 nm[5] |
Plan your fab
Building a Precision Optics process? Get a complete equipment list.
Open the fab equipment planner →