Comparison ledger
Speedline Momentum, Speedline Momentum DL, Speedline Momentum Elite, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | MomentumSpeedline | Momentum DLSpeedline | Momentum EliteSpeedline |
|---|---|---|---|
| OEM | Speedline | Speedline | Speedline |
| Category | Assembly / SMT | Assembly / SMT | Assembly / SMT |
| Wafer size | — | — | — |
| Process node | — | — | — |
| Introduced | — | — | — |
| Production run | — | — | — |
| Lifecycle | — | — | — |
| Lifecycle milestones | — | — | — |
| Control system | — | — | — |
| Generation | — | — | — |
| Family | Speedline Momentum | Speedline Momentum | Speedline Momentum |
| Cited variants | — | — |
|
| Specifications | |||
| Voltage | 200-240[2] | — | — |
| Configuration | 50/60 Hz[2] | — | 50/60 Hz[4] |
| Largest Single Load | — | 6 Amps[3] | 6 Amps[4] |
| Full Load Current | — | 10 Amps[3] | 10 Amps[4] |
| Maximum Board Size (X x Y) | — | — | 609.6 mm x 508 mm (24" x 20")[5] |
| Maximum Board Size (X x Y) in Staging Mode (Momentum Elite) | — | — | 457 mm x 508 mm (18" x 20")[5] |
| Minimum Board Size (X x Y) | — | — | 50.8 mm x 50.8 mm (2" x 2")[5] |
| Board Thickness | — | — | 0.2 mm (0.008") to 5.0 mm (0.20"), up to 6.0 mm (0.24") without top clamp foils[5] |
| Maximum Print Area (X x Y) | — | — | 609.6 mm x 508 mm (24" x 20")[5] |
| Print Gap (Snap-off) | — | — | 0 mm to 6.35 mm (0" to 0.25")[5] |
| Stencil Frame Size | — | — | 737 mm x 737 mm (29" x 29")[5] |
| Vision Field-of-View (FOV) | — | — | 106 mm x 8 mm[5] |
| Total System Alignment | — | — | 12.5 microns[5] |
| Alignment Repeatability | — | — | ±0.0005" at 6 sigma, Cpk of greater than or equal to 2.0[5] |
| Power Requirements | — | — | 200 to 240 VAC Single Phase 50/60Hz[5] |
| Air Supply | — | — | 100 PSI at 4 CFM[5] |
| Dimensions (W x D x H) | — | — | 1675.5 mm (65.96") x 1593.1 mm (62.72") x 1638.4 mm (64.5")[5] |
| Machine Weight | — | — | 899 kg (1982 lbs)[5] |
| Wet Print Accuracy | — | — | 20 microns @ 6 sigma, Cpk > 2[6] |
| Maximum Board Weight | — | — | 4.5 kg (9.92 lbs)[6] |
| Board Edge Clearance | — | — | 3.0 mm (0.118")[6] |
| Underside Clearance | — | — | 12.7 mm (0.5") standard / Configurable for 25.4 mm (1.0")[6] |
Plan your fab
Building a Assembly / SMT process? Get a complete equipment list.
Open the fab equipment planner →