Agilent
7500 A ICP-MS
The Agilent / Varian 7500 A is an inductively coupled plasma mass spectrometer (ICP-MS). The Agilent / Varian 7500 A uses a digital drive 27 MHz ICP RF generator and hyperbolic profile quadrupole rods.[1]
What it is
The Agilent 7500 A is an inductively coupled plasma mass spectrometer (ICP-MS) designed for trace element analysis.[1]
How it works
The Agilent 7500 A ICP-MS uses a Peltier-cooled spray chamber to introduce liquid samples into the plasma.[1]
The instrument features a fully automatic, computer-controlled torch position in all three axes and a ShieldTorch System (STS).[1]
The mass analyzer uses hyperbolic profile quadrupole rods driven by a highest-frequency, digitally synthesized 3 MHz RF Quadrupole Driver.[1]
Detection is performed by a simultaneous dual mode detector with an exclusive high-speed amplifier.[1]
Where it fits in the process flow
General reference — not yet source-verifiedIn semiconductor manufacturing, ICP-MS instruments are used for trace metal analysis to monitor contamination in process chemicals, deionized water, and on wafer surfaces.
What do the numbers mean?
Power & electrical4
Gas & chemistry1
- Agilent Active Mass Flow Controllers (AMFC)[1]
Optics & imaging2
- Simultaneous dual mode detector with exclusive high-speed amplifier[1]
Control & software2
- Fully automatic, computer controlled torch position in all three axes[1]
Configuration & options8
- Peltier-cooled spray chamber[1]
- ShieldTorch System (STS)[1]
- Hyperbolic profile quadrupole rods[1]
- 7500 ICP-MSChemstationVer. B.02.01[1]
- I-AS Integrated Autosampler for ICP-MS[1]
- Brother Printer HL1440[1]
- P 9621 D HP Flat Panel Monitor L1702 2Tone TCO99[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Not publicly documented
The following facts about the 7500 A ICP-MS are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 7500 A ICP-MS are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 7500 A ICP-MS are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 7500 A ICP-MS are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 7500 A ICP-MS are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the 7500 A ICP-MS is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]Inventory photo
Last updated Oct 8, 2026.
Compare with similar tools
View all →
The Perkin Elmer 1050 UV-VIS Spectrometer is an instrument used for analyzing ultraviolet and visible light absorption spectra.
The Agilent 11980 A is a fiber optic interferometer for precision optical measurements.