ASM
Siplace SX
Plate 01SIPLACE SX | Maximum flexibility for the intelligent factory
ASMPT SMT SolutionsWatch on YouTubePlate 02ASM Siplace SX machine
QUINN SMTWatch on YouTube
Power
50/60 Hz[1]
Vacuum
5-10 bar[2]
Performance
+/- 25µ @ 3σ[3]
Optics
Camera for CP head (type 34 & 41)[1]
What it is
How it works
The SIPLACE SX uses removable gantries, and its installed head configuration determines component range, output, placement force, and the machine role within a line.[4][3]
The SIPLACE SX family includes CP20, CPP, and TWIN or TH head options, and the class supports feeder, conveyor, camera, and software combinations that vary by configured machine.[4][9][10]
Where it fits in the process flow
General reference — not yet source-verifiedThe ASM Siplace SX sits in SMT assembly after material preparation and before downstream soldering and inspection steps.
Applications
What do the numbers mean?
Power & electrical4
Vacuum & pumping1
Optics & imaging3
- Camera for CP head (type 34 & 41)[1]
Performance1
Control & software5
Dimensions & facilities3
Configuration & options29
- Feeders not included[1]
- PnP head part number CP20[1]
- Operation hours 92353[1]
- Component count 40373702[1]
- CP20A Head type[1]
- Dual head & conveyor[1]
- Change over table 1[1]
- 2 Feeder carts / 60 slots ea[1]
- 8 noz changer with nozzles (4 front / 4 rear)[1]
Vintage & configurations
What replaced it?
Alternatives
Tools documented as functional equivalents — same process step and wafer size, from a different manufacturer. Each equivalence cites its source.
- Fuji Aimex Placement— Same function class: Assembly / SMT, UnknownCompare in depthsource[5]
- Juki RS 1— Same function class: Assembly / SMT, UnknownCompare in depthsource[6]
- Juki FX 3 RAL— Same function class: Assembly / SMT, UnknownCompare in depthsource[7]
- Juki KE 3010 AL Placement— Same function class: Assembly / SMT, nullCompare in depthsource[8]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What is the placement speed of the SIPLACE SX1 and SX2?
The SIPLACE SX1 has a placement speed of up to 43,250 cph, and the SIPLACE SX2 has a placement speed of up to 86,500 cph (SIPLACE benchmark). IPC-rated speeds are 33,000 cph for the SX1 and 66,000 cph for the SX2.[4][9]
What is the placement accuracy of the Siplace SX?
The platform placement accuracy is ±25 µm @ 3σ. With the TwinStar (TWIN) head, the placement accuracy is 22 µm @ 3σ.[4][9]
What feeder capacity does the Siplace SX offer?
The Siplace SX has a feeder capacity of up to 120 × 8-mm slots. The machine can be equipped with two feeder carts, each with 60 slots.[1][4][9]
What are the available placement head options?
Three placement head types are available: the CP20 (SpeedStar) high-speed head, the CPP (MultiStar) flexible head that can switch between pick-and-place, collect-and-place, and mixed modes, and the TWIN (TwinStar) head for large, heavy, and odd-shaped components.[4][9]
Not publicly documented
The following facts about the Siplace SX are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the Siplace SX are on record.
Answerable by: OEM historical records or a trade-press announcement
The control-system platform and OS era of the Siplace SX are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Siplace SX are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Siplace SX is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the Siplace SX are on record.
Answerable by: an OEM parts catalog or a service engineer
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (10)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]waferpedia.com — waferpedia.comwaferpedia.com
- [3]smt.asmpt.com — smt.asmpt.comsmt.asmpt.com
- [4]gk-asm.com — gk-asm.comgk-asm.com
- [5]Equipment inventory listing
- [6]Equipment inventory listing
- [7]Equipment inventory listing
- [8]Equipment inventory listing
- [9]https://www.hilpert.ch/wp-content/uploads/2023/12/asm_brochure_asm_siplace_sx_en_201209_online.pdf — hilpert.chhilpert.ch
- [10]https://www.sohigh-tek.com/uploads/product_img/SIPLACE/ASMPT_Brochure_SIPLACE-SX_EN_230110.pdf — sohigh-tek.comsohigh-tek.com
Last updated Oct 10, 2026.
Compare with similar tools
View all →
The Juki FX 3 RAL is a pick-and-place machine described with dual head, four tables, six segments per head, and 220 V / 60 Hz power.
The Juki KE 3010 AL Placement is an Assembly / SMT placement system.
