Waferpedia

Leybold

D 40 B

Leybold D 40 B family
Research Quality: 40% complete

Provisional entry — research in progress

This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.

The Leybold D 40 B is a dual-stage oil-sealed rotary vane vacuum pump. The Leybold D 40 B has a pumping speed of 40 m3/h. The Leybold D 40 B uses DN 40 KF connections on the intake and exhaust sides.[1][2]

LeyboldD 40 B
No photo available yet

Power

3-phase, 208-460 VAC, 50/60 Hz[4]

Vacuum

46 m3/h (27.1 cfm)[2]

Gas delivery

57 / 59 dB(A) without/with gas ballast[2]

What it is

The D 40 B is a dual-stage pump from the TRIVAC B series manufactured by Leybold. The pump has a nominal pumping speed of 55 cubic meters per hour (32.5 CFM). The ultimate total pressure without gas ballast is ≤ 2 × 10⁻³ mbar (≤ 1.5 × 10⁻³ Torr). The ultimate partial pressure without gas ballast is 1 × 10⁻⁴ Torr. The noise level is 57 dB(A) without gas ballast and 59 dB(A) with gas ballast. The oil filling capacity is 1.7 L minimum to 2.6 L maximum. The water vapor capacity is 1184 grams per hour. The pump operates on 3-phase 208-460 VAC, 50/60 Hz.[3][4][1][5]

Where it fits in the process flow

The Leybold D 40 B is commonly used for vacuum furnace evacuation, backing turbomolecular pumps, backing diffusion pumps, rotary evaporation, refrigeration system evacuation, epoxy degassing, vacuum sterilization, backing mass spectrometers, freeze drying, vacuum centrifugal applications, vacuum distillation, and space research.[4][1]

Applications

The D 40 B is employed in many industrial and research vacuum processes, including coating, chemistry, metallurgy, vacuum furnaces, lamp and tube manufacturing, space simulation, environmental engineering, and as a backing pump for large turbomolecular pump systems.[1]

What do the numbers mean?

Power & electrical3

Motor
3-phase, 208-460 VAC, 50/60 Hz[4]
Accurate?
Motor
3-phase, 230/400 V, 50/60 Hz[1]
Accurate?
Nominal motor speed
1430 min-1 (50 Hz); 1735 min-1 (60 Hz)[2]
Accurate?

Vacuum & pumping18

Type
Two-stage (dual-stage) oil-sealed rotary vane vacuum pump[2]
Accurate?
Nominal pumping speed
46 m3/h (27.1 cfm)[2]
Accurate?
Pumping speed
40 m3/h (23.6 cfm)[2]
Accurate?
Pumping speed
55 m3/h (32.5 cfm)[3]
Accurate?
Pumping speed displacement
32.5 CFM[4]
Accurate?
Pumping speed
48 m3/h[1]
Accurate?
Ultimate partial pressure without gas ballast
10^-4 mbar (0.75 x 10^-4 Torr)[2]
Accurate?
Ultimate total pressure without gas ballast
< 2 x 10^-3 mbar (< 1.5 x 10^-3 Torr)[2]2 sources
Accurate?
Ultimate pressure
≤ 2 x 10^-3 (≤ 1.5 x 10^-3)[3]
Accurate?
Ultimate total pressure with gas ballast
< 5 x 10^-3 mbar (< 3.8 x 10^-3 Torr)[2]
Accurate?
Ultimate pressure
1 x 10^-4 Torr[4]
Accurate?
Water vapour tolerance
40 mbar (30 Torr)[2]
Accurate?
Connections, intake and exhaust side
DN 40 KF[2]
Accurate?
Pump length
720 mm (D 40 B)[2]
Accurate?
Media compatibility
Standard versions not suited for pumping oxygen exceeding atmospheric concentration, hazardous gases, or extremely aggressive or corrosive media[2]
Accurate?
Pump type
Dual-stage oil-sealed rotary vane vacuum pump[2]
Accurate?
Pumping speed
40 m3/h[2]
Accurate?
Water vapour tolerance
40 mbar[2]
Accurate?

Gas & chemistry3

Noise level (DIN 45 635)
57 dB(A) without gas ballast / 59 dB(A) with gas ballast[2]
Accurate?
Gas ballast valve
Opened with position 1, closed with position 0[1]
Accurate?
Noise level
57 / 59 dB(A) without/with gas ballast[2]
Accurate?

Dimensions & facilities1

Weight
68 kg[2]
Accurate?

Configuration & options12

Displacement
30 cfm[1]
Accurate?
Water vapour capacity
1184 g/h[2]
Accurate?
Oil filling
1.7 L min / 2.6 L max[2]
Accurate?
Admissible ambient temperature
+12 to +40 °C[2]
Accurate?
Inlet flange
DN 40 KF[1]
Accurate?
Motor rating
2200 W (3 HP)[5]
Accurate?
Motor protection (IP rating)
IP55[2]
Accurate?
Part number
11286 (replaces PN 91286-2)[4]
Accurate?
ATEX classification
Equipment Group II, Category 3 (ATEX Directive 94/9/EG); available as Categories 3 i and 3 i/o with mineral oil[2]
Accurate?
Recommended lubricant
LVO 100 mineral oil (standard version); prepared for hydrocarbon oil service[1]
Accurate?
Oil filling, min./max.
1.7 / 2.6 l[2]
Accurate?
Admissible ambient temperature
+12 ... +40 °C[2]
Accurate?

Vintage & configurations

Documented models & variants

DesignationGenerationVintageChangesSource
TRIVAC D 40 BCS——Corrosive PFPE (perfluoropolyether) application version of the D 40 B; Leybold part number 11388.ajvs.com[1]
TRIVAC D 40 B ATEX Category 3 i/3o versions——ATEX Category 3 i and 3 i/o versions with mineral oil; catalog numbers 140180 and 140190 with motor type EeDA 100L/4A rated 2600 W at 50 Hz.ajvs.com[2]
Interested in this tool?
Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

  • TypeTwo-stage (dual-stage) oil-sealed rotary vane vacuum pump[2]
  • Nominal pumping speed46 m3/h (27.1 cfm)[2]
  • Pumping speed40 m3/h (23.6 cfm)[2]
  • Pumping speed55 m3/h (32.5 cfm)[3]
  • Pumping speed displacement32.5 CFM[4]
  • Pumping speed48 m3/h[1]
  • Ultimate partial pressure without gas ballast10^-4 mbar (0.75 x 10^-4 Torr)[2]
  • Ultimate total pressure without gas ballast< 2 x 10^-3 mbar (< 1.5 x 10^-3 Torr)[2]
  • Ultimate pressure≤ 2 x 10^-3 (≤ 1.5 x 10^-3)[3]
  • Ultimate total pressure with gas ballast< 5 x 10^-3 mbar (< 3.8 x 10^-3 Torr)[2]
  • Ultimate pressure1 x 10^-4 Torr[4]
  • Water vapour tolerance40 mbar (30 Torr)[2]
  • Noise level (DIN 45 635)57 dB(A) without gas ballast / 59 dB(A) with gas ballast[2]
  • Connections, intake and exhaust sideDN 40 KF[2]
  • Motor3-phase, 208-460 VAC, 50/60 Hz[4]
  • Motor3-phase, 230/400 V, 50/60 Hz[1]
  • Nominal motor speed1430 min-1 (50 Hz); 1735 min-1 (60 Hz)[2]
  • Pump length720 mm (D 40 B)[2]
  • Gas ballast valveOpened with position 1, closed with position 0[1]
  • Media compatibilityStandard versions not suited for pumping oxygen exceeding atmospheric concentration, hazardous gases, or extremely aggressive or corrosive media[2]
  • Pump typeDual-stage oil-sealed rotary vane vacuum pump[2]
  • Pumping speed40 m3/h[2]
  • Water vapour tolerance40 mbar[2]
  • Noise level57 / 59 dB(A) without/with gas ballast[2]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What type of pump is the Leybold D 40 B?

The Leybold D 40 B is an oil-sealed, dual-stage rotary vane vacuum pump from the TRIVAC B series.[3][1]

What is the pumping speed?

The nominal pumping speed is 55 m³/h (32.5 cfm).[3]

What is the ultimate pressure?

The ultimate pressure is less than 2.0×10⁻³ mbar (1.5×10⁻³ Torr).[1]

What applications is the pump used for?

Applications include vacuum furnace evacuation, backing turbomolecular pumps, backing diffusion pumps, rotary evaporation, refrigeration evacuation, epoxy degassing, vacuum sterilization, mass spectrometry backing, freeze drying, vacuum distillation, space research, vacuum coating, chemistry, metallurgy, and more.[4][1]

Not publicly documented

The following facts about the D 40 B are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

  • No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the D 40 B are on record.

    Answerable by: OEM historical records or a trade-press announcement

  • The control-system platform and OS era of the D 40 B are not on record.

    Answerable by: an engineer who operated it or OEM installation records

  • No publicly documented failure modes or field errata for the D 40 B are on record.

    Answerable by: a field service engineer, process engineer, or maintenance technician

  • The process node or technology generation of the D 40 B is not on record.

    Answerable by: an OEM datasheet or a fab qualification report

  • No publicly documented compatible parts, consumables, or accessories for the D 40 B are on record.

    Answerable by: an OEM parts catalog or a service engineer

No research found yet — worked with this tool? Share what you know.

Sources & citations

Sources (6)Every fact above is drawn from these public sources
  1. [1]ajvs.com — ajvs.comajvs.com
  2. [2]ajvs.com — ajvs.comajvs.com
  3. [3]shop.leyboldus.com — shop.leyboldus.comshop.leyboldus.com
  4. [4]idealvac.com — idealvac.comidealvac.com
  5. [5]idealvac.com — idealvac.comidealvac.com
  6. [6]Equipment inventory listing
Was this page accurate?

Last updated Oct 2, 2026.

Compare with similar tools

View all →