Speedline

Camalot FX-D

Research Quality: 40% complete

Provisional entry — research in progress

This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.

The Speedline Camalot FX-D is a dispensing system. The Speedline Camalot FX-D is configurable as stand-alone or in-line. The Speedline Camalot FX-D has a max dispense area of 508 mm x 508 mm.^[1]^[2]^[3]

Camalot FX-D — Inventory photo — Fig. 01Camalot FX-DInventory photo^[4]

Power

200-240V 1-Phase^[5]

Vacuum

Close loop DC servo axis^[2]

Performance

+/- 75 µm @ 3 sigma^[2]

Optics

2 µm^[2]

How it works

The Speedline Camalot FX-D uses closed-loop motion control, a gantry drive system, and closed-loop pump control. The model includes XY placement accuracy of plus or minus seventy-five micrometres at three sigma, total system accuracy of one hundred twenty-five micrometres at three sigma, and Z axis accuracy of plus or minus twenty-five micrometres at three sigma.^[2]^[1]

What do the numbers mean?

Power & electrical1

Power: 200-240V 1-Phase^[5]

Vacuum & pumping11

Pump control: Close loop DC servo axis^[2]
Jet dispense pump currently used: 680 SD, ideally suited for line application^[3]
Pump temperature range: Ambient to 70 ˚C^[2]2 sources
Board support: 13” Edge Clamp w/ Vacuum Board Supports^[5]
Conveyor options: SMT edge clamps w/vacuum support^[1]
Lift chuck options: Heated contact w/vacuum or non-contact (convection)^[1]
Pump control: Closed-loop dc servo axis^[1]
SmartStream: Non-contact, positive displacement streaming pump for underfill, low level sensor^[1]
DC servo pumps: Rotary positive displacement pumps for line applications with low level sensor^[1]
Multi-piston pump: Heated, standard or low-volume designs, low level sensor^[1]
Pump currently used: 680 SD^[3]

Wafer handling1

Chuck temperature range: Ambient to 130°C^[1]

Gas & chemistry1

Purpose: Packaging or lid attach dispense chemical for chip protection and/or thermal dissipation^[3]

Optics & imaging7

Encoder resolution: 2 µm^[2]
Encoder resolution: 0.3 µm^[2]
Z sense type: Non-contact laser^[2]
Illumination: Red Illuminator For SMT & Std Fiducials^[5]
Laser: Standard Laser^[5]
Program method: Teach camera, off-line programming, or text file download^[1]
Z sense type: Mechanical probe or CCD laser^[1]

Performance10

XY placement accuracy: +/- 75 µm @ 3 sigma^[2]
Total system accuracy: 125 µm @ 3 sigma^[2]
Z axis accuracy: +/- 25 µm @ 3 sigma^[2]
Vision system: Auto vision alignment^[2]
Vision system: Auto vision alignment; aligns dispense patterns to any fiducials^[3]
Features: Auto alignment vision^[5]
Auto-vision alignment: Aligns dispense patterns to any fiducials^[1]
XY placement accuracy: +/-75 microns @ 3 sigma^[1]
Total system accuracy: +/-125 microns @ 3 sigma^[1]
Z axis accuracy: +/-25 microns @ 3 sigma^[1]

Control & software3

Features: SMEMA interface^[5]
Operating system: Windows XP^[5]
Operating system: Microsoft Windows XP^[1]

Dimensions & facilities12

Conveyor type: Flat belt, currently 165 mm width^[2]
Features: Weight scale^[2]
Conveyor type: Flat belt with auto width adjust^[1]
Min conveyor width: 25.4 mm (1.0")^[1]
Above board clearance: 25.4 mm (1.0")^[1]
Underboard clearance: 30.5 mm (1.2")^[1]
Transport height: 790 mm to 965 mm (32.1" to 38")^[1]
Conveyor weight capacity: 3.66 kg total (8.1 lbs.) w/ 3 lift chucks^[1]
Machine footprint: 1270 mm x 1475 mm x 1730 mm (W x D x H)^[1]
Machine weight: 680 kg (1500 lbs.)^[1]
Crated weight: 890 kg (1962 lbs.)^[1]
Conveyor width: 165 mm width^[2]

Configuration & options25

Make: Speedline^[4]
Model: Camalot FX-D^[2]
Purpose: Dispense low viscosity material (underfill) for C4 life enhancement^[2]
Speed: 500 mm/sec^[2]
Gantry drive system: Closed-loop DC, servo ball screw drive^[2]2 sources
Speed: 188 mm/sec^[2]
Z axis type: Closed-loop DC servo, ball screw drive^[2]2 sources
Max dispense area: 508 mm x 508 mm^[2]2 sources
Z axis travel: 100 mm^[2]2 sources
Tray or product preheat: Ambient to 130 ˚C^[2]
Features: Die edge detection algorithms^[2]
Features: Needle cleaner^[2]
Status: Available^[5]
Make: Speedline Camalot^[5]
Model: FX-D 8000^[5]
Year: 2010^[5]
Features: Pre-dispense/purge station^[5]
Features: XYZ needle calibration station^[5]
Protocol: SMEMA^[1]
Conveyor lift chucks: Up to three 13” x 10” chucks^[1]
Industry standards: CE, SMEMA, SEMI S2 & S8^[1]
Supplier: Speedline^[2]; Stand alone or in-line^[1]
XY speed: 500 mm/sec^[2]
Z axis speed: 188 mm/sec^[2]

Vintage & configurations

2009Document date^[1]
The specification document is dated 02/09.

Documented models & variants

Designation	Generation	Vintage	Changes	Source
FX-D 8000	—	2010	An in-line dispense system variant with auto alignment vision, pre-dispense/purge station, XYZ needle calibration station, SMEMA interface, Windows XP, and 200-240V 1-phase power.	midwestsmt.com^[5]

Interested in this tool?

Need help with this tool?Embed spec card

What does it need to run?

Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.

PurposePackaging or lid attach dispense chemical for chip protection and/or thermal dissipation^[3]
Pump controlClose loop DC servo axis^[2]
Jet dispense pump currently used680 SD, ideally suited for line application^[3]
Pump temperature rangeAmbient to 70 ˚C^[2]
Power200-240V 1-Phase^[5]
Board support13” Edge Clamp w/ Vacuum Board Supports^[5]
Conveyor optionsSMT edge clamps w/vacuum support^[1]
Lift chuck optionsHeated contact w/vacuum or non-contact (convection)^[1]
Pump controlClosed-loop dc servo axis^[1]
SmartStreamNon-contact, positive displacement streaming pump for underfill, low level sensor^[1]
DC servo pumpsRotary positive displacement pumps for line applications with low level sensor^[1]
Multi-piston pumpHeated, standard or low-volume designs, low level sensor^[1]
Pump currently used680 SD^[3]

Where are the manuals?

Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.

Not publicly documented

Field notes

No research found yet — worked with this tool? Share what you know.

Worked with this tool? Help preserve its knowledge →

Frequently asked questions

What is the maximum dispense area for the Speedline Camalot FX-D?

The Speedline Camalot FX-D has a maximum dispense area of five hundred eight millimetres by five hundred eight millimetres.^[2]^[3]^[1]

Not publicly documented

The following facts about the Camalot FX-D are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.

The control-system platform and OS era of the Camalot FX-D are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the Camalot FX-D are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the Camalot FX-D is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No publicly documented compatible parts, consumables, or accessories for the Camalot FX-D are on record.
Answerable by: an OEM parts catalog or a service engineer
No publicly hosted manuals, SOPs, or datasheets for the Camalot FX-D are on record.
Answerable by: university cleanroom staff or an OEM application specialist