SSEC
M 3303 Lift Off
The SSEC M 3303 Lift Off is a wet processing machine designed for lift-off processes on 8-inch wafers. The SSEC M 3303 Lift Off requires 208 VAC single-phase 60 Hz power and 20 A current.[1][2]
What it is
How it works
General reference — not yet source-verifiedLift-off equipment is used to remove unwanted deposited material after patterning so that only the intended feature remains on the substrate.
Wet processing and clean tools in this class use liquid handling, rinse, and cleaning steps to treat wafers during fabrication.
Where it fits in the process flow
General reference — not yet source-verifiedLift-off processing sits in the wet bench part of the fab flow and follows pattern definition steps that create the mask or resist geometry used to define the deposited film.
Lift-off processing is used downstream of deposition to clear excess material and preserve the desired pattern on the wafer.
Applications
General reference — not yet source-verifiedLift-off tools are used for pattern transfer workflows that require selective removal of deposited films from wafer surfaces.
What do the numbers mean?
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What wafer size does the SSEC M 3303 Lift Off support?
The SSEC M 3303 Lift Off is specified for 8-inch wafers.[1]
What are the electrical requirements for the SSEC M 3303 Lift Off?
The SSEC M 3303 Lift Off uses 208 VAC, single-phase power at 60 Hz and 20 A.[1][2]
What process category is the SSEC M 3303 Lift Off associated with?
The SSEC M 3303 Lift Off is categorized as wet processing and clean equipment.[2]
Not publicly documented
The following facts about the M 3303 Lift Off are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the M 3303 Lift Off are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the M 3303 Lift Off are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the M 3303 Lift Off are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the M 3303 Lift Off are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the M 3303 Lift Off is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]M 3303 Lift Off — SSEC | Specs, Sourcing & Service | Waferpedia — waferpedia.comwaferpedia.com
Last updated Oct 10, 2026.
Compare with similar tools
View all →The Glen/YES 1000FP is a plasma cleaning system designed to accept a range of shelf sizes for changing flat panel industry needs.
The 1000P is a plasma cleaning system with four 16 x 16 inch shelves and a total capacity of 1024 square inches.
The Semitool 11600 SRD is a spin rinse dryer manufactured by Semitool.