SUSS MicroTec
MCS 8 Spin
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
The SUSS MicroTec MCS 8 Spin is a manual coating and aqueous developing system.[2]
The MCS 8 is a modular coating and developing platform with a spin coating function and a configurable set of process modules.[2]
How it works
The MCS 8 supports manual setup across multiple modules and frames, and the platform can combine coating, developing, baking, and cleaning modules in one configured system.[2]
The MCS 8 uses a modular architecture with two customizable modules per frame, and the platform can be expanded into a LabCluster with up to six frames and twelve modules.[2]
Applications
What do the numbers mean?
Configuration & options8
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
What type of system is the MCS 8?
The MCS 8 is a manual coating and aqueous developing system.[2]
What process steps can the MCS 8 integrate?
The MCS 8 can integrate spin coating, developing, baking, and cleaning modules.[2]
How is the MCS 8 configured?
The MCS 8 uses a modular design with two customizable modules per frame, and the system can be expanded to up to six frames with twelve modules in a LabCluster configuration.[2]
What process areas is the MCS 8 intended for?
The MCS 8 is intended for start-ups, research and development, pilot lines, low-volume production, and laboratory environments.[2]
Not publicly documented
The following facts about the MCS 8 Spin are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the MCS 8 Spin are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the MCS 8 Spin are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the MCS 8 Spin are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the MCS 8 Spin are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the MCS 8 Spin is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (2)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]suss.com — suss.comsuss.com
Last updated Oct 7, 2026.