Teradyne
A 563
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
The Teradyne A 563 is a tester.[1]
What it is
The Teradyne A 563 is a tester manufactured by Teradyne. The model designation is A 563.[1]
How it works
General reference — not yet source-verifiedThe A 563 Tester works by providing controlled electrical stimulus to a device under test and measuring the device's resulting electrical behavior. A test program defines which pins are driven, what levels are applied, and what readings are acceptable.
The A 563 Tester contains signal sources, measurement units, and a test head that contacts the device under test. The tester compares measured values against test limits to make a pass or fail decision.
Where it fits in the process flow
General reference — not yet source-verifiedThe A 563 Tester is used at the probe and final test stages of semiconductor production. The probe and final test stages come after wafer fabrication and packaging.
In a wafer probe operation, the A 563 Tester can be paired with a prober that contacts each die on a wafer. In final test, the same type of tester can be paired with a device handler that feeds packaged units through the test station.
Applications
General reference — not yet source-verifiedThe A 563 Tester is used to screen semiconductor devices for electrical faults before shipment. The testing verifies basic electrical performance and identifies devices that fail production limits.
The test and probe capability of the A 563 Tester supports both wafer level testing and packaged device testing. The A 563 Tester is therefore suited to semiconductor assembly and test operations.
What do the numbers mean?
No specifications recorded yet
Be the first to add cited specifications for this tool.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Is the Teradyne A 563 a tester?
Yes, the Teradyne A 563 is a Tester.[1]
Not publicly documented
The following facts about the A 563 are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No specifications for the A 563 are on record.
Answerable by: an OEM datasheet, a cleanroom equipment inventory, or an engineer who operated or installed it
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the A 563 are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the A 563 are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the A 563 are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the A 563 are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (1)Every fact above is drawn from these public sources
- [1]Equipment inventory listing
Last updated Sep 26, 2026.
