Comparison ledger
Disco 321, Disco DAG 810 Back, side by side. Every value shown is drawn from the cited encyclopedia entries.
| Attribute | 321Disco | DAG 810 BackDisco |
|---|---|---|
| OEM | Disco | Disco |
| Category | Dicing & Grinding | Dicing & Grinding |
| Wafer size | — | — |
| Process node | — | — |
| Introduced | — | — |
| Production run | — | — |
| Lifecycle | — | — |
| Lifecycle milestones | — | — |
| Control system | — | — |
| Generation | — | — |
| Family | Disco 321 | Disco DAG 810 |
| Specifications | ||
| OEM | Disco[1] | — |
| Model | 321[1] | — |
| Equipment type | Wafer Dicing Saw[1] | — |
| Facility context | Cleanroom Instrumentation[1] | — |
| Application area | Nano and Micro Fabrication[1] | — |
| Location | FNT 4.106[1] | — |
| Wafer Size | Up to 6 inches[2] | 6 inch[5] |
| Spindle Power | 1.0 kW Synchro Spindle (or 1.5 kW Synchro Spindle in some configurations)[3] | — |
| Spindle Power (alternate) | 1500 Watt spindle[2] | — |
| Non-Contact Setup | Non Contact Setup[3] | — |
| Microscope | Microscope With Eyepiece and Shutter (or Dual Objective Microscope With Eyepiece)[3] | — |
| Broken Blade Detection | Broken Blade Detection[3] | — |
| Light Tower | Includes Light Tower[3] | — |
| Chuck Type | 6" Universal Chuck (or 6" Porous Film Frame Chuck)[2] | — |
| Wafer size capability | Up to 6" wafers[3] | — |
| Chuck | 6-inch porous film frame chuck[2] | — |
| Spindle power | 1500-watt spindle[2] | — |
| Footprint | Small footprint[2] | — |
| Setup | Non-contact setup[3] | — |
| Blade break detection | Broken blade detection[3] | — |
| Other features | Floppy drive, light tower, blade tools, manuals[3] | — |
| Phase | — | 3 Phase[4] |
| Configuration | — | 50/60 Hz[4] |
| Full Load Current | — | 10 A[4] |
| Machine Main Breaker Rating | — | 30 A[4] |
| Largest Load | — | 3 A[4] |
| Interrupting Capacity | — | 14 kA[4] |
| Voltage | — | 200 VAC[5] |
| Ampere Rating of Largest Largest Load | — | 3 A[5] |
| Power | — | 12 kVA[6] |
| Frequency | — | 50/60 Hz[4] |
| Apparent Power | — | 12 kVA[6] |
| Power Supply | — | 3 Phase[4] |
| Power Consumption | — | 12 kVA[6] |
Plan your fab
Building a Dicing & Grinding process? Get a complete equipment list.
Open the fab equipment planner →