Disco
DFD 6240 Automatic Dicing
The Disco DFD 6240 Automatic Dicing is an automatic dicing saw. The Disco DFD 6240 Automatic Dicing is configured as a single-spindle tool with 1.2 kW spindle power. The Disco DFD 6240 Automatic Dicing has an 8" porous chuck table as the default setting.[1][2]
What it is
Applications
General reference — not yet source-verifiedThe machine is designed for high-volume production environments where repeatable cut quality and low defect rates are required. Features like blade breakage detection and kerf center alignment contribute to process stability.
What do the numbers mean?
Power & electrical5
- 50/60 Hz[1]
Wafer handling2
- 8” Porous chuck table, default setting[1]
Optics & imaging2
- Blade Breakage detector, BBD[1]
Performance2
- Kerf Center Alignment[1]
Configuration & options21
- Single Spindle (1.2KW)[1]
- Disco ZH05 Blade Hub Type[1]
- Non-Contact Set-up, NCS[1]
- 8” Spinner table, default setting[1]
- Cleaning by Atomizing Nozzle[1]
- Rinse Cleaning Spec[1]
- Angle Recognition System[1]
- Duct Fan[1]
- 3 Wire + Ground[1]
- 380 - 415 Vac[1]
What does it need to run?
Site utility requirements, footprint, and infrastructure needed to install and operate this tool. Sourced from public records.
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the DFD 6240 Automatic Dicing are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the DFD 6240 Automatic Dicing are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the DFD 6240 Automatic Dicing are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the DFD 6240 Automatic Dicing are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the DFD 6240 Automatic Dicing are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the DFD 6240 Automatic Dicing is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (4)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]waferpedia.com — waferpedia.comwaferpedia.com
- [3]Inventory photo
- [4]Disco DFD 6240 Automatic Dicing vs Disco DFG 840 Automatic comparison | Waferpedia — waferpedia.comwaferpedia.com
Last updated Oct 7, 2026.
Compare with similar tools
View all →
The Lapmaster Model 15 is a bench-mounted unit with a rigid, lightweight, cast aluminum base, of the 'ring lapper' configuration, enabling high standards of flatness and surface finish.
General referenceThe Blanchard 18 D Surface is a vertical-spindle rotary-table surface grinding machine used to produce flat, parallel surfaces on metal workpieces.
The Blanchard 20 36 Surface is a surface grinder used in dicing and grinding applications.
