MRSI
505 Die Attach
Provisional entry — research in progress
This page was generated automatically from cited public sources and hasn't completed the full research pass yet. Every specification shown carries its source; more detail is added as research completes.
What it is
How it works
General reference — not yet source-verifiedA die attach machine places semiconductor dice onto a substrate, package part, or module site and bonds them in position for later assembly steps.
A machine in this class typically uses a pick-and-place or bonding head, alignment tooling, and controlled dispense or placement functions to position each die before attachment is completed.
Where it fits in the process flow
General reference — not yet source-verifiedThe MRSI 505 Die Attach belongs in back-end semiconductor assembly rather than front-end wafer fabrication.
The MRSI 505 Die Attach supports assembly flow steps that follow die placement and precede later packaging and module build operations.
Applications
What do the numbers mean?
Wafer handling5
- Comes with Standard Boats / Cassettes[1]
Configuration & options5
Where are the manuals?
Generated from public-source data on file. Enter your email to access — nothing is published; details are routed privately.
Not publicly documented
Field notes
No research found yet — worked with this tool? Share what you know.
Frequently asked questions
Not publicly documented
The following facts about the 505 Die Attach are absent from this record as of this revision. First-hand knowledge or a citation closes a gap; every submission is reviewed before publication.
No publicly documented production dates or lifecycle milestones (introduction, end of production, EOL) for the 505 Die Attach are on record.
Answerable by: OEM historical records or a trade-press announcement
No publicly documented variants, configuration options, or revision breakpoints of the 505 Die Attach are on record.
Answerable by: an OEM product catalog or an engineer who ordered or specified the tool
The control-system platform and OS era of the 505 Die Attach are not on record.
Answerable by: an engineer who operated it or OEM installation records
No publicly documented failure modes or field errata for the 505 Die Attach are on record.
Answerable by: a field service engineer, process engineer, or maintenance technician
The process node or technology generation of the 505 Die Attach is not on record.
Answerable by: an OEM datasheet or a fab qualification report
No research found yet — worked with this tool? Share what you know.
Sources & citations
Sources (5)Every fact above is drawn from these public sources
- [1]Inventory photo
- [2]fabsurplus.com — fabsurplus.comfabsurplus.com
- [3]Equipment inventory listing
- [4]MRSI 505 Die Attach — MRSI | Specs, Sourcing & Service | Waferpedia — waferpedia.comwaferpedia.com
- [5]505 Die Attach — MRSI | Specs, Sourcing & Service | Waferpedia — waferpedia.comwaferpedia.com
Last updated Oct 6, 2026.
Compare with similar tools
View all →The Esec 2009 fS E is an epoxy die bonder for 300 mm high-speed die attach applications. The Esec 2009 fS E supports wafer sizes from 4" to 12" on 8" or 12" wafer frames.
The Esec 2100 hS i is a die bonder for epoxy die attach applications. The Esec 2100 hS i is a 300 mm high-speed platform with support for wafer sizes from 4 inches to 12 inches on 8-inch or 12-inch wafer frames.
The Esec 2100 sD advanced i is a die bonder for epoxy die attach applications. The Esec 2100 sD advanced i is described as a 3rd generation 300 mm high speed platform with 20 µm bonding accuracy and an optional 15 µm placement accuracy in High Accuracy Mode.
The Datacon 2200 evo is a die bonder for epoxy die attach applications.
The Esec Datacon 2200 evo advanced is a die bonder for epoxy die attach applications. The Esec Datacon 2200 evo advanced is described as a flexible 300 mm high-speed platform with wafer sizes from 4 inches to 12 inches on 8-inch or 12-inch wafer frames.
The Esec Datacon 2200 evo hF is a die bonder on Besi's 3rd-generation 300 mm high-speed platform. The Esec Datacon 2200 evo hF is specified for epoxy die attach applications and supports wafer sizes from 4" to 12" on 8" or 12" wafer frames.